Step1:
Log in to the router web interface i.e. 192.168.1.1 and navigate to the Advanced -> Administration ->Backup Settings as shown in figure 1.
Figure 1
Step2:
Click the “Erase” button under “Revert to factory default settings” section as shown in figure 2.
Figure 2
Step 3:
Click the “Yes” button as shown in figure 3.
Figure 3
The router will reboot and you will be able to see a page same as figure 4. Wait for the reboot process to complete.
Figure 4
Step 4:
Log in to the router web interface i.e. 192.168.1.1 and navigate to the Advanced ->Administration->Router Update as shown in figure 5.
Figure 5
Step 5:
Click “Browse”, select the path for the DD-WRT firmware that you downloaded and click on the “Upload” button as shown in the figure 6.
Figure 6
Step 6:
Then click on the “OK” button as shown in figure 7.
Figure 7
The router will reboot and you will be able to see a page same as figure 8. Wait for the reboot process to complete.
Figure 8
Step 7:
It is always recommended to reset the router to factory defaults after successful firmware upgrade. This can be done by pressing the reset button for say 30secs as shown in figure 9. You will need to use something pointed to press the reset button, I use a pen for the same.
Figure 9
Step 8:
After reset, you will be logged on to the DD-WRT web page and asked to enter a new username and password as shown in figure 10.
Figure 10
Step 9:
Enter the username and password for the same. (Default username = root and password = admin for DD-WRT) and then click on the “Change Password” button as shown in figure 11. It is recommended to clear the cache of your web browser before using it.
Figure 11
Step 10:
Then you can see the status page of your router and the firmware version as shown in figure 12.
Figure 12
Did you find you find this steps helpful ? If you have any issues with netgear router please let us know we there to help you, call us today at our toll free number or you can visit our website for more info.
Toll free numbers: 1888 479 2017
