SET UP WIRELESS SECURITY FOR NETGEAR ROUTERS

WANT TO CHANGE YOUR NETGEAR ROUTER SETTING LET THIS STEP HELP YOU OUT.

1. From a computer connected to your router, go to 192.168.0.1
   
   
2. Enter the details below when asked to log in
   
   - User name: admin
   - Password: password
   
   
3. The Netgear's admin pages will open
   
   
4. If the router starts checking for new firmware, click Cancel
5. Select Wireless Settings from the Setup menu
   
   
   
6. The Wireless Network field is where you'll find your wireless network name
   
   - Name (SSID): You can change this to something new and personal to you
   - Region: select Europe
   - Channel: select Auto
   - Mode: select Up to 150Mbps
   
   
7. In the Wireless Access Point field
   
   - Check Enable Wireless Access Point
   - Check Allow Broadcast of Name (SSID)
   - Don't check Wireless Isolation
   
   
   
8. In the Security Options field, select Mixed WPA-PSK+WPA2-PSK
   
   
   
9. In the Network Key field you'll find your security key or password
10. If you'd like, you can enter a new security key for your connection
    
    This should be over eight characters and can be made up of upper and lower case letters from a-z and numbers 0-9.
    
    
    
11. Click Apply - any changes you've made will be updated
12.  If you face any issue at above steps than please let us know. You can fix your technical issue for your netgear router through our technicians who are professional and Microsoft certificated . At netgear tech support we provide All router issues instantly. Let us help you out call us at our toll free numbers 
13. USA : 1888 479 2017
14. UK: 0800 368 9229
15. you log on to our web site at:  https://www.icognix.net/netgear-router-support/
16.   Were these steps usefull to you let us know please leave comments.