Configure your router for cable internet connection with NETGEAR genie

     NETGEAR

1. Unplug the modem and router power cords.
Note: If you have a back-up battery on your modem, remove it temporarily.

2.    Connect an Ethernet cable from the modem to the Internet port of the router

3.    Connect an Ethernet cable from the computer to any one of the LAN ports of the router.

4.    Re-insert the back-up battery (if any) and reconnect the modem power. Wait for all lights to become stable.

5.    Reconnect the power of the router and wait for the power light to become green.

6.    Open a web browser and type the router's IP address which would be either http://192.168.0.1 or http://192.168.1.1 in the address bar and press Enter.

o    You are prompted to log into the router.

o    The default username is admin and the default password is password. 

o    If you need additional assistance with router you can call us at 1888 479 2017

7.    You are prompted to enter a username and password. Enter the following default login credentials:

o    Username: admin

o    Password: password

8.    Click ADVANCED > Setup Wizard.

9.    Select Yes and click Next.



Note: The Setup Wizard will now detect the internet connection type.

10.  Once the setup has finished configuring the internet connection, the Congratulations page displays.
Click Take me to the Internet to test the connection.

  If you need more assistance than you just call our toll free number to get technical support instantly. we provide solutions for routers  instantly. you just call at our toll free number that is 1888 479 2017

   your you can log to our web site :

   https://www.icognix.net/netgear-router-setup/

netgear router support