Thursday 24 November 2016

Netgear router Wireless Router Keep Disconnecting or Dropping the Connection

The issue is usually caused by one of three things: the driver for your wireless card, the firmware version on your netgear router (basically the driver for the router) or settings on your router


In this post there are 3 methods which can fix this issue.

Update PC Driver

First, you’ll need to go to the web site for the manufacturer of your computer: Dell, HP, Toshiba, etc and go to their support or driver downloads page. 
Select your system or type it in and find the latest driver for you wirless card. There is usually a section called Networking and underneath you should see a list of drivers. One of them should have the word “Wireless” in it. If you have more than one wireless driver, then you need to figure out which one you have installed on your computer.
 determine the model number for your wireless card by pressing the Windows key + the Pause button at the same time. This brings up the System Properties dialog. Another way to get to it is to right click on My Computer and select Properties. Once there, click on Advanced system settings.
Click on the Hardware tab and then click on Device Manager.

You’ll see a list of devices with plus signs to the left of them. Click on the one called “Network Adapters” and there will be an entry for your wireless card as shown below:

Now download that driver from the list off the manufacturers web site. Usually the wireless card is called something “Intel Pro Wirelss” or “Dell Wireless”, etc. Once you download the file to your desktop, double click on it and follow the steps to install. You might have to restart your computer.
If the driver on the computer was the problem, the dropped connections should go away completely. If not, then you might have to try updating the router firmware.
Update Netgear Router Firmware
Updating router firmware is a not so trivial task that varies depending on the router brand you happen to have. Almost none of them have an automatic update feature. Instead you have to download the latest firmware from their website, log into your router and then upload it up perform the update. If your having issue to find call us we would help you out 1888 479 2017
To get started, you need to figure out the IP address of your router and use that to log in via a browser. Read my post on finding the IP address for a wireless access point. Since the method to update the router firmware varies so much by brand, it’s best to search your router model number + “firmware update” to find specific instructions.
Router Settings
The last issue that can be causing dropped connections is various settings on your router. In recent times, you have dual-band routers which let you broadcast on both 2.4 and 5 GHz networks. These advanced routers normally work really well with the latest gadgets and computers, but on older machines, you can sometimes run into issues. Here’s a couple of things I would try:
1. Connect to the 2.4 GHz network if you’re currently connected to the 5 GHz one.
2. On the router, make sure the channel settings for the networks is set to Auto. If you have picked a particular channel for some reason, try a different channel.
3. Turn off extra security features like MAC address filtering, network isolation and Wi-Fi Protected Setup. None of these really increase security all that much and end up causing more trouble.
4. Make sure your wireless network mode is set to Mixed. Sometimes picking a higher mode can cause problems with older devices.
5. If you don’t know anything about your router settings, try resetting your router completely by pressing the reset button. Configure wireless security and leave it at that.
Hopefully one of these solutions will fix  wireless connection problem. 
or
You can take help of professional technicians to fix it.  We have a team of Netgear router support professionals, who are well-versed in handling all types of router related issues.
The most experienced and certified Netgear tech support professionals on board. Our experts offer customized solution to help you overcome the router issues. They are available round the clock over phone, email and web chat for all types of Netgear technical support.

 USA :1-888-479-2017 | Toll-free CAN :1-888-536-4211 |  Email: support@icognix.com





Monday 14 November 2016

Netgear router technical support number USA 1888 479 2017: Configure your router for cable internet connectio...

Netgear router technical support number USA 1888 479 2017: Configure your router for cable internet connectio...:      NETGEAR 1. Unplug the modem and router power cords. Note : If you have a back-up battery on your modem, remove it tempora...

Configure your router for cable internet connection with NETGEAR genie

     NETGEAR




1. Unplug the modem and router power cords.
Note: If you have a back-up battery on your modem, remove it temporarily.

2.    Connect an Ethernet cable from the modem to the Internet port of the router

3.    Connect an Ethernet cable from the computer to any one of the LAN ports of the router.

4.    Re-insert the back-up battery (if any) and reconnect the modem power. Wait for all lights to become stable.

5.    Reconnect the power of the router and wait for the power light to become green.


6.    Open a web browser and type the router's IP address which would be either http://192.168.0.1 or http://192.168.1.1 in the address bar and press Enter.

o    You are prompted to log into the router.
o    The default username is admin and the default password is password. 
o    If you need additional assistance with router you can call us at 1888 479 2017

7.    You are prompted to enter a username and password. Enter the following default login credentials:


o    Username: admin
o    Password: password

8.    Click ADVANCED Setup Wizard.

9.    Select Yes and click Next.



Note:
 The Setup Wizard will now detect the internet connection type.

10.  Once the setup has finished configuring the internet connection, the Congratulations page displays.
Click Take me to the Internet to test the connection.

  If you need more assistance than you just call our toll free number to get technical support instantly. we provide solutions for routers  instantly. you just call at our toll free number that is 1888 479 2017
   your you can log to our web site :

Wednesday 9 November 2016

NETGEAR ROUTER CONNECTION ISSUE RESOLVING STEPS

 Options to try in resolving your connection issues:

Changing to a different wireless channel:
  1. Click on Wireless Settings below the setup menu.
  2. Change the Channel (any channel can be used).
  3. Click Apply and test for improvement in performance.
Note: The Wireless Settings option is available under Advanced Setup in routers with the newer genie interface.


Try reducing the connection speed:
  1. Click  Wireless Settings below the setup menu.
  2. Change the Mode to a lower speed.
  3. Click Apply and test for improvement in performance.

Adjust advanced wireless settings:
  1. Click Wireless Settings under Advanced.
  2. Change the Fragmentation Length and CTS/RTS Threshold values to 2304.
  3. Click Apply and test for improvement in performance.


  4. IF NOT RESOLVED THAN PLEASE CONTACT OUR TECH SUPPORT TEAM FOR TECHNICAL HELP, 
  5. APART FROM CONNECTION ISSUE YOU CAN RESOLVE ALL  ISSUE RELATED TO YOUR NETGEAR ROUTERS.
  6. OUR PROFESSIONAL TEAM IS AVAILABLE 24\7 TO SERVE YOU.
  7. JUST CALL US AT OUR TOLL FREE NUMBER THAT IS 1888 479 2017 FOR USA CUSTOMERS
  8. OR BY LOGGING ON TO OUR WEBSITE AT: https://www.icognix.net/netgear-router-support/
  9. HOPE THE ABOVE STEPS WOULD HELP.