NETGEAR
1. Unplug the modem
and router power cords.
Note: If you have a back-up battery on your modem, remove it temporarily.
Note: If you have a back-up battery on your modem, remove it temporarily.
2.
Connect an Ethernet
cable from the modem to the Internet port of the router
3.
Connect an Ethernet
cable from the computer to any one of the LAN ports of the
router.
4.
Re-insert the back-up
battery (if any) and reconnect the modem power. Wait for all lights
to become stable.
6.
Open a
web browser and type the router's IP address which would be either http://192.168.0.1 or http://192.168.1.1 in
the address bar and press Enter.
o You are prompted to log into the router.
o The default username is admin and
the default password is password.
o If you need additional assistance with router
you can call us at 1888 479 2017
7.
You are prompted to
enter a username and password. Enter the following default login
credentials:
o Username: admin
o Password: password
8.
Click ADVANCED > Setup
Wizard.
9.
Select Yes and
click Next.
Note: The Setup Wizard will now detect the internet connection type.
Note: The Setup Wizard will now detect the internet connection type.
10.
Once the setup has
finished configuring the internet connection, the Congratulations page
displays.
Click Take me to the Internet to test the connection.
Click Take me to the Internet to test the connection.
If you need more assistance than you just call our toll free number to get technical support instantly. we provide solutions for routers instantly. you just call at our toll free number that is 1888 479 2017
your you can log to our web site :
No comments:
Post a Comment